The MODUL SYSTEM swimmingpool provides complete dependability, and greater simplicity of implementation; the walls are made of form panels (polyester resin reinforced with fibre glass) supported with concrete posts every 45 cm; the stiffeners are reinforced and held under the upper belt.

Let’s take a look at how a MODUL SYSTEM swimming pool is built :

All the components of the structure are made of polyester,
This material was chosen because it is resistant, solid and light,
It is easy to assemble and pose.
It is a self-supporting structure. ;
You can pack around it without water or fill your swimming pool without previously packing, no need for braces!!!! (See photos)

With our beach panel, you can build your pool edges without waiting for the filler to settle.

MODUL SYSTEM offers several types of bottom :
Flat bottom : height 1.10m, 1.20m, 1.30m, 1.40m, 1.50m
Basin bottom : height from 1.10m to 1.80m

Our MODUL SYSTEM swimming pool is sold with :
An independent cartridge filter block, or conventional sand wall filter of 16 or 21 m3/h, 1 centrifugal pump with stainless steel turbine and class F IP55 protection, a 300w projector, 2 backflows, 1 connector for pool cleaner, 1 skimmer, 1 electric cabinet with clock.

Sealing is performed by reinforced 150/100 PVC in a choice of colours (white, blue or sand) which comes with a ten-year non degressive warranty; leakage is impossible !

Several shapes available : rectangular, oval or kidney bean.

Possible to add :
Roman steps, beach entries, liner banner, or printed liner, and a ten-year non degressive seal warranty.